Free audit · Cornwall & SD&G

Free commercial & residential security systems audit

Uncover coverage blind spots, eliminate multi-vendor IT confusion, verify fire code compliance, and lower your monthly monitoring costs without buying unnecessary new hardware.

Executive overview

A 15-minute look at what you already own

Most commercial property managers, industrial operators, and homeowners in Eastern Ontario are either paying too much for out-of-town alarm monitoring or relying on outdated security setups that leave critical operational gaps.

An Access Security Logistix (ASL) System Audit is a zero-obligation, 15-to-30-minute evaluation conducted by a qualified local technician. We inspect your existing physical hardware, review your fire compliance status, evaluate camera positioning, and audit your network cabling backbone. Whether you are looking to modernise an aging system or switch away from a high-cost national provider, our audit provides a clear, actionable roadmap.

15–30 minutes

On-site, at your convenience.

Zero obligation

No contract, no hardware purchase.

Local technician

Cornwall-based, not a call centre.

Report in 24 hours

Itemized findings and savings.

Two audit pathways

Pick the review that fits

Pathway 1

The “Switch & Save” hardware reprogramming audit

Who it is for: Businesses and homeowners currently locked into expensive monthly contracts with national or out-of-town alarm companies.
The core objective: Identify how much money you can save by switching your existing security and monitoring to ASL’s local dispatch grid.
How it works: In 90% of cases, your existing door sensors, motion detectors, control panels, and wiring are fully functional. National providers often tell customers their system is obsolete to force costly equipment upgrades. ASL technicians inspect your current control board and demonstrate how we can reprogram your existing hardware to communicate directly with our local monitoring center — eliminating equipment replacement costs and cutting monthly rates.

Pathway 2

The full-stack enterprise infrastructure audit

Who it is for: Commercial facility managers, logistics warehouses in Cornwall Business Park, industrial plants, multi-unit residential buildings, and expanding retail operations.
The core objective: Evaluate the entire low-voltage tech stack — security alarms, access control doors, ULC fire monitoring compliance, AI video coverage, and server rack cabling.
How it works: ASL conducts a multi-point physical walk-through to uncover physical vulnerability zones, camera coverage blind spots, network throughput bottlenecks, and municipal fire code deficiencies under one consolidated review.

5-point audit breakdown

Everything we inspect

Module 1 · Alarm hardware & monitoring cost audit

Panel compatibility check: Inspection of existing panel brands and control boards to confirm compatibility with local IP and cellular monitoring module updates.
Contract & rate review: Comparison of your current monthly monitoring invoices against ASL's local commercial and residential rate tiers.
False alarm diagnostic: Identification of faulty sensors, aging backup batteries, or improper sensor placements that cause false alarm dispatches and municipal fines.

Module 2 · HD video surveillance & AI analytics audit

Coverage & blind spot analysis: Assessment of camera angles, lens resolutions, lighting conditions, and unmonitored perimeter zones across parking areas, loading docks, and entry doors.
AI & smart analytics readiness: Evaluation of whether existing camera wiring can support modern AI upgrades, such as automated License Plate Recognition (LPR), thermal perimeter detection, or human vs. vehicle detection.
Storage & bandwidth check: Inspection of on-premise NVR hard drives and cloud storage retention schedules to ensure video archives meet insurance and legal requirements.

Module 3 · ULC-S561 fire alarm monitoring & code compliance audit

CAN/ULC-S561 verification: Review of fire panel signal transmission paths to ensure compliance with current Ontario Building Code and Ontario Fire Code standards.
Dual-path signal reliability check: Inspection of primary and secondary signal communication channels (IP and redundant cellular) to prevent signal loss during landline outages.
Documentation & certificate audit: Verification that your property holds valid ULC certificates required by local fire prevention officers and commercial insurance underwriters.

Module 4 · Structured network cabling & server rack health check

MDF/IDF server rack inspection: Evaluation of patch panel organization, cable labeling, power supply backups, and overall server room cable management.
Bandwidth & cable grade test: Verification of network cabling categories (Cat5e vs. Cat6/Cat6A and fiber optic lines) powering your IP cameras, access control panels, and Wi-Fi access points.
Single-vendor friction check: Pinpointing areas where IT contractors and security providers blame each other for offline equipment or network drops.

Module 5 · Emergency response time & service SLA audit

Commute & dispatch evaluation: Calculation of the real-world response time of your current service provider during a critical 2:00 AM system outage or panel trouble signal.
Tier-2 engineering direct access: Evaluation of your current support channels to determine if you are reaching a local technician or a remote call center.

What happens during the audit

Step by step

On-site arrival & consultation

10 minutes

Our local technician arrives at your Cornwall or SD&G facility, discusses your current system pain points, reviews past vendor invoices, and identifies your immediate operational priorities.

Physical & technical walk-through

15–20 minutes

We inspect your security control panel, test sensor signals, examine camera feeds, evaluate fire panel connections, and review your network server rack.

Immediate on-site assessment

5 minutes

We explain our findings directly to you in plain English — pointing out immediate cost savings, simple panel reprogramming options, or urgent compliance risks.

Comprehensive audit summary delivery

Within 24 hours

You receive a clear, itemized report detailing current hardware status, exact monthly cost savings if you switch, camera positioning recommendations, and a phased upgrade roadmap if needed.

Audit deliverables

What you receive

Itemized cost comparison

A line-by-line financial breakdown comparing your current vendor's annual monitoring fees against ASL's local rates.

Hardware lifecycle matrix

A clear list of existing hardware components rated as Reusable (reprogram and save), Upgrade Recommended, or Code Deficient.

Camera & sensor coverage map

A simple layout identifying unmonitored zones, high-risk entry points, and recommended camera angle adjustments.

ULC compliance status report

A written status report detailing whether your commercial fire alarm monitoring meets current municipal code requirements.

Target industry profiles

Built for your kind of site

Industrial plants & logistics distribution hubs

Focuses on long-distance perimeter AI surveillance, license plate tracking at shipping gates, heavy-duty network cabling, and ULC fire monitoring across large square footage.

Retail plazas & commercial offices

Focuses on simple "Switch & Save" panel reprogramming, keycard access control for staff doors, and high-definition lobby surveillance.

Multi-family residential & property managers

Focuses on central fire alarm monitoring compliance, common-area camera coverage, vandal-resistant access fobs, and reducing monthly operating budgets.

Licenses, certifications & partnerships

Credentials that back every installation

ASL carries the fire alarm credentials, security partnerships, and manufacturer authorizations that property owners and insurers expect.

CFAA Certification

ASL is fully CFAA-licensed for fire alarm service, inspection, testing, and verification.

CAN/ULC-S561

National standard governing fire alarm monitoring installations.

CAN/ULC-S524

Installation standard for fire alarm systems.

CAN/ULC-S537

Verification standard for fire alarm systems.

CAN/ULC-S536

Annual inspection and testing standard for fire alarm systems.

Ontario Code Compliance

All work follows Ontario Building Code and Fire Code life-safety requirements.

Alarm.com Authorized Partner

Authorized Alarm.com partner for smart home and business security platforms.

Kantech Corporate Certified

Kantech Corporate certified for commercial access control systems.

24/7 live monitoring

Two Canadian monitoring centres

ASL is an authorized dealer for two Canadian monitoring providers, so alarm and fire signals are handled by live operators here in Canada — not overseas call centres.

Graham Alarm Monitoring

Ontario-based monitoring centre handling alarm and fire signals for ASL customers.

Armstrong Monitoring

Nova Scotia-based monitoring centre providing redundant 24/7 live operator coverage.

Audit FAQ

Common questions

How long does a commercial security audit take, and is there any commitment required?

A typical security audit by Access Security Logistix takes between 15 and 30 minutes on-site in Cornwall or SD&G. The audit is completely free with zero obligation to purchase hardware or sign a contract.

Do I have to replace all my cameras and alarm panels to switch to Access Security Logistix?

No. In most cases, Access Security Logistix can inspect, clean up, and reprogram your existing security control panels and cameras to connect directly to ASL's local monitoring grid, eliminating equipment replacement costs.

What is the difference between a general security review and a ULC fire monitoring audit?

A general security review checks burglary sensors, access doors, and camera coverage. A ULC fire monitoring audit specifically inspects CAN/ULC-S561 compliance, dual-path cellular transmission, and panel trouble signal routing required by Ontario Fire Codes.

Book your free on-site security & infrastructure audit

Fill out the details below to schedule a 15-minute audit with an ASL technician in Cornwall or SD&G. We will review your current hardware, evaluate monthly cost savings, and provide a full system report.

Prefer to call? 613-932-8729